IFC2FEM ist eine Webanwendung, mit der ein Rohbau-IFC-Modell schnell in ein statisches DXF-Modell konvertiert werden kann, das direkt in FEM-Software (z. B. SOFiSTiK oder Dlubal RFEM) importiert werden kann.
Das Modell kann auf zwei Arten geladen werden: - per Drag & Drop oder - über einen klassischen Import-Dialog im Browser.
Nach dem Import der IFC-Datei kann der Benutzer folgende Parameter einstellen: - Rotationswinkel des Modells um X oder Y-Achse, - manuelle Eingabe der Geschosshöhen gemäß den statischen Ebenen, die vom Tragwerksplaner vorgegeben werden, - Toleranz für das Zusammenführen von Konturen.
Auf Basis dieser Eingaben erzeugt IFC2FEM eine DXF-Datei, die den statischen Rohbau des Gebäudes abbildet und für den Import in die FEM-Software vorbereitet ist.
Aktuell werden folgende IFC-Klassen berücksichtigt:
Einschränkungen: - IfcBeam wird derzeit nicht unterstützt. - Die Anwendung ist ideal für rechtwinklige/geradlinige Rohbau-Projekte. - Wände, die nicht in einer Standardebene (z. B. XY-Ebene) liegen, erfordern zusätzliches manuelles Nachmodellieren. - Runde oder gebogene Wände werden bei der Konvertierung nicht berücksichtigt.
Die Dauer der Konvertierung hängt von Größe und Komplexität des Modells ab:
Nach dem Import der DXF-Datei in SOFiSTiK, RFEM oder eine andere FEM-Software kann der Anwender: - mit wenigen Klicks die DXF-Geometrie in ein analytisches Modell überführen, - die statischen Randbedingungen wie gewohnt definieren.
Je nach Projekt kann die Zeitersparnis bei der Modellaufbereitung etwa 70–90 % gegenüber einem vollständig manuellen Aufbau des FEM-Modells betragen.
Für ein typisches Rohbau-BIM-Projekt mit ca. 5.000 m² kann die manuelle Erstellung des statischen Modells beispielsweise wie folgt angesetzt werden:
Nach dieser Annahme ergibt sich ein Arbeitsaufwand pro Modell von:
Bei einer angenommenen Zeitersparnis von ca. 70 % durch IFC2FEM ergibt sich:
Für ein Büro, das 10 solcher Modelle pro Jahr bearbeitet:
(Die tatsächlichen Werte hängen von Honorar, Projektumfang und Organisation ab; das Beispiel illustriert das Prinzip.)
IFC2FEM bietet zwei Hauptabrechnungsmodelle plus einen kostenlosen Bereich:
Abrechnung pro Konvertierung - 0,0XX €/m² konvertierter Gesamtfläche (Summe aller Geschossflächen).
Jahresabonnement - XXX € pro Jahr mit unbegrenzter Anzahl an Konvertierungen (im Rahmen einer Fair-Use-Regelung).
Kostenlose Projekte - Projekte mit einer gesamten Geschossfläche von weniger als 1.000 m² können kostenlos konvertiert werden.
IFC2FEM richtet sich an:
IFC2FEM is a web-based application that converts a structural core (Rohbau) IFC model into a static DXF model that can be imported into FEM software such as SOFiSTiK or Dlubal RFEM.
The model can be uploaded in two ways: - via drag & drop, or - using a standard import dialog in the browser.
After importing the IFC file, the user specifies: - the rotation angle of the model around X or Y-axis, - the storey heights according to the structural engineer’s static levels, - the tolerance used for merging contours.
Based on these settings, IFC2FEM generates a DXF file representing the structural model that is ready for further processing in FEM software.
Currently, the following IFC classes are supported:
Limitations: - IfcBeam is not yet supported. - The application is best suited for rectangular, straight buildings (Rohbau phase). - Walls that are not aligned with standard planes (e.g., XY plane) will require additional manual modeling after import. - Curved and circular walls are not considered during conversion.
The conversion time depends on the size and complexity of the model:
After importing the DXF file into SOFiSTiK, RFEM, or other FEM tools, the user can:
Depending on the project, IFC2FEM can save approximately 70–90 % of the time compared to building the FEM model fully manually.
For a typical Rohbau BIM project of about 5.000 m², a purely manual creation of the structural FEM model might be estimated as:
According to this assumption, the total labor cost per model can be, for example:
If IFC2FEM achieves a time reduction of around 70 %, this leads to:
For a company processing 10 such models per year:
(Exact numbers depend on internal rates and project complexity; this is an illustrative example.)
IFC2FEM offers two main pricing options plus a free tier:
Pay-per-conversion - 0.0XX €/m² of converted total area (sum of all storey areas).
Annual subscription - XXX € per year with an unlimited number of conversions (subject to a fair-use policy).
Free projects - Projects with a total storey area below 1.000 m² can be converted free of charge.
IFC2FEM is designed for:
IFC2FEM je web aplikacija koja omogućava da se Rohbau IFC model (gruba građevinska konstrukcija) jednostavno konvertuje u DXF statički model spreman za dalju obradu u FEM programima, idealno u SOFiSTiK-u ili Dlubal RFEM-u.
Model se može učitati na dva načina: - putem drag & drop funkcije, ili - preko klasičnog import dijaloga u pregledniku.
Nakon importa IFC modela, korisnik definiše: - ugao rotacije objekta oko X ili Y ose, - ručni unos visina etaža prema statičkim nivoima dobijenim od statičara, - željenu toleranciju spajanja kontura.
Na osnovu ovih parametara IFC2FEM generiše DXF fajl koji predstavlja statički model konstrukcije i spreman je za uvoz u FEM softver.
Trenutno se u obzir uzimaju sljedeće IFC klase:
Ograničenja: - IfcBeam trenutno nije podržan. - Aplikacija je idealna za pravougaone projekte i zidove koji su u standardnim ravnima (npr. u XY ravni). - Zidovi koji nisu u XY ravni zahtijevaju dodatno, naknadno modeliranje. - Kružni i zaobljeni zidovi se ne uzimaju u obzir pri konverziji.
Vrijeme konverzije zavisi od veličine i složenosti objekta:
Nakon uvoza DXF fajla u FEM program (npr. SOFiSTiK ili RFEM), korisnik u pravilu: - uz nekoliko klikova pretvara DXF geometriju u analitički model, - definiše preostale statičke parametre prema standardnoj praksi.
U zavisnosti od objekta, ušteda vremena pri pripremi statičkog modela iznosi približno 70–90 % u odnosu na ručno modeliranje.
Za tipičan BIM/Rohbau projekat površine oko 5.000 m², ručna izrada statičkog modela može izgledati ovako:
Prema toj pretpostavci, radni trošak po jednom modelu može iznositi npr.:
Ako IFC2FEM donosi uštedu vremena od cca 70 %, to znači:
Za firmu koja godišnje obrađuje 10 ovakvih modela:
(Precizne brojke zavise od organizacije rada, satnica i složenosti projekata, ali princip uštede ostaje isti.)
IFC2FEM nudi dva osnovna modela naplate, plus jedan besplatan prag:
Plaćanje po konverziji - 0,0XX €/m² konvertovane ukupne površine (zbir površina svih etaža).
Godišnja pretplata - XXX € godišnje, sa uključenim neograničenim brojem konverzija (u okviru fer korištenja, kako je definisano uslovima korištenja).
Besplatni projekti - Objekti kod kojih je ukupna površina svih etaža manja od 1.000 m² mogu se konvertovati besplatno.
IFC2FEM je namijenjen za: